How to Clean Toilet Stains

Toilet bowl stains are hard to eliminate and especially difficult when the cause is a build-up of minerals. These can be caused by pipe corrosion or iron in the water supply.

The best solution to tackle these is to regularly clean and disinfect the toilet frequently. It will prevent these stains from becoming too stubborn and needing to be treated again in a few weeks.

Vinegar

Distilled white vinegar, a safe and inexpensive cleaning alternative to bleach and other harsh chemicals, cuts through soap scum and hard water deposits. It’s also an effective odor-killer that won’t stain your bathroom surfaces or leave behind toxic fumes.

Vinegar can clean toilet stains in various ways, pouring it directly into the bowl or using a spray bottle. The trick is to let it sit for a few minutes before scrubbing.

You can even use baking soda and vinegar to remove stubborn stains. Mix a cup of baking soda with a half-cup of vinegar to create a paste that you can apply to the color.

This mixture should be applied to the stain and left for 30 minutes. After that, you can scrub it with a toilet brush. The baking soda should loosen the colors and make them easier to remove with a regular scrub.

Baking Soda

Baking soda is a great way to clean toilet stains. It is a mild abrasive that gently wears away colors and helps remove tough odors.

To use baking soda, sprinkle it around the toilet bowl and let it sit for a few minutes. Next, pour a cup of vinegar (white or cleaning) onto the baking soda.

Rinse off the mixture and scrub with a toilet brush to remove any remaining stains. Then flush away.

This method is beneficial for removing hard water stains. The chemical reaction between the vinegar and baking soda will help eat away at those stubborn stains, leaving your toilet bowl looking brand new!

This is a powerful and easy to make toilet cleaner that works on common stains as well as tough hard water stains. To get the best results, add the solution to your toilet and allow it to sit for 30 minutes before scrubbing.

White Pumice Stone

If you have a toilet plagued with hard water marks, rust stains, and other unpleasant things in the bowl, a white pumice stone can help you clean those problems. The lightweight volcanic rock is abrasive and can easily remove stubborn stains from a porcelain toilet.

Wet the stone and toilet surface thoroughly and apply firm pressure as you scrub to use the pumice stone. As you rub, tiny particles of pumice dust combine with water to form an abrasive paste that breaks down the stains and rust.

Keep the pumice stone wet throughout the cleaning to avoid scratching the porcelain. You can also use rubber gloves to protect your hands from the abrasive pumice.

There are several types of pumice stones available. Some are bar stick-shaped, with the end sharpened into a thick pen or chisel shape for easier scrubbing. Others have a plastic handle attached for easier handling. These can be purchased from supermarkets and hardware stores.

Hydrogen Peroxide

The chemical compound hydrogen peroxide, or H2O2, is an effective disinfectant. It kills viruses, bacteria, mold, and fungi that cause stains on your bathroom surfaces.

Hydrogen peroxide comes in different potencies and is most commonly sold in 3 percent solutions. It is a safe, non-toxic disinfectant that does not irritate the lungs.

It can also be used on food, such as fruit and vegetables. A quarter cup of hydrogen peroxide in water can wash away any pesticides and odor-causing bacteria on your veggies.

You can also use hydrogen peroxide to remove mildew and mold from your bathroom fixtures, shower curtains, floors, walls, and toilet bowls. Just spray it onto the surface and let it sit for 30 minutes, then scrub off any stubborn stains.